Table Top Tamisium Butane Solvent Extractor
TE175 - STANDARD PACKAGE
COMES WITH BRASS SAFETY QUICK DISCONNECTS AND BASIC ACCESSORIES PACKAGE FOR SOLVENT RECOVERY (PHOTO SHOWS OPTIONAL STAINLESS FITTINGS) BRASS SHOULD NOT BE USED FOR FOOD GRADE CONSUMABLES.
You can upgrade this system to Stainless Safety QDs on the replacement parts page
If you want the ability to extract and recover the solvent but do not need the accessories then this is the system for you. You may already have accessories or may elect to simply order them at a later time.
THE STANDARD PACKAGE 2 IS A SIMPLE EXTRACTOR WITH RECOVERY ABILITY but does not include the accessories as does the Deluxe and Super Deluxe Systems.
THESE ACCESSORIES CAN BE ADDED LATER IF DESIRED. The Accessories allow you to take full advantage of all the capabilities of the extractor and make extracting easier and faster. Most desired when using the extractor multiple times per day.
2+ ounce (175 ml) Extractor with External Recovery Condenser Tank
With Brass Connections and Accessories for Solvent Recovery only
New Prices include NEW UPGRADED DESIGN with an upgraded tank design which allows
MORE SOLVENT CAPACITY for an increased extraction efficiency to get that extra 3-5% oil out INCREASED AIR BUFFER ZONE to allow more consistent recovery times
RAISED TANK BASE to allow better cooling and heating of the tank bottoms.
LONGER 1/4 FITTINGS for ease of use when opening and closing valves
Extracts from 2+ ounces (75 grams of plant material ) and recover solvent for reuse.
Comes with Basic Package plus Recovery System and all the QDs and Valves..
- Recovery tanks allow Recovery of Solvent for Reuse
- Recovery Tank holds 26 liquid ounces or 700 ml volume
- The Extractor Tank holds 26 liquid ounces or 700 ml volume
- Column holds 2+ ounces plant weight or 175 ml volume
- The RC Tank also allows the use of other solvents in combination with butane or pressurized liquid solvents during the same extraction and servers to recover the solvent for reuse.
- Comes as a complete recovery system with Accessory Tank, connections and lines;
INCLUDES:
BRASS SAFETY QUICK DISCONNECTS -3 couplers and 3 nipples for Extractor Tank, Column, Recovery Tank and Recovery Line
In addition you will now receive a Safety Purge Line with 2 way BRASS SAFETY QDs
One Nickel Plated 1/4" line QD to replace the Line if needed.
One BRASS SAFETY QD to remove the SPL from tank being purged.
(When using any Safety QD setup, you can not purge pressure from any part of the extractor without a Safety Purge Line with a SAFETY QD)
USD $995
SHIPPING INSURANCE INCLUDED
CUSTOM FITTED CONNECTIONS WITH PRESSURE TEST
USD $40
We will custom fit all your Ball Valves and Quick Disconnects using the proper Vices and Torque. After we fit all the ball valves and Quick Disconnects, we will pressure test your Extractor and check it for leaks. Make sure you have no problems by having us do what we have done hundreds of times. And have a ready to use extractor when it arrives at your door. If you elect to do this yourself, I want to inform you that if the stainless parts are not tightened correctly they could bond together. If a leak exist when the parts bond then you will have to cut the fitting off and replace the parts that were damaged. If we damage it, we will replace them at no charge.
What follows is a brief explanation for assembly:
To assemble the parts, you must use 3-4 full wraps of tightly wrapped Teflon tape to each and every 1/4" pipe thread. Then take a drop of oil onto the forefinger and thumb pads and twist the oil onto the taped fitting. When you are twisting the ball valves onto the fitting be sure and orient the handles in the correct orientation just at the point where the seal is formed. Do not over tighten. If you find that you have to turn it to far around because it does not seal and you are afraid you may over tighten the part, then take it off, remove all the tape from both parts and apply an additional wrap to what you applied before and repeat the procedure.
Size of column where plant material will be placed.
US pounds = 2 plus ounces
KILOS = 60 gram weight or 175 ml by volume
All Tamisium Extractors come with a lifetime warranty and lifetime support.
Every extractor comes with a Fully Illustrated Operational Manual
Column capacity represents the volume of plant material you can extract from with that particular size extractor. The weights are a guide to help you find the desired coarseness you need to have your plant material ground to in order to occupy the given space for an efficient extraction to occur. Each column represents 1/4 the volume of the solvent required to extract from the column when full. In other words. The solvent tanks are 4 times larger than the column that holds the organic material being extracted. 1 gallon translates into 1 kilo of material capacity with most dried botanicals when ground up to the proper coarseness
We do not sell these extractors for indoor use in any environment not properly set up to use any flammable solvent for extraction purposes. As most solvents are flamable. Please treat the extractor accordingly no matter the solvent chosen to use. These extractors are sold for use in professional laboratory conditions operating under strict safety guidelines. NO SPARKS OR FLAMES SHOULD BE PRESENT WHEN ANY FLAMMABLE SOLVENT IS USED.
Please remember that most solvents are flammable. When opening and closing any of the extractors, please safely purge the units and do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Accessory Safety Purge lines are available for each extractor.
