TE700 8 OUNCE / optional HEATING JACKETS and Extra Recovery Tanks now Available!
Tamisium Liquid N Butane Solvent Extractor
TE700 8 OUNCE SUPER DELUXE TAMISIUM BUTANE EXTRACTION SOLVENT RECOVERY SYSTEM. CLOSED SYSTEM
Extra Recovery Tanks and Heating Jackets are Now Available and in stock! $200 off complete system.
COMES WITH STAINLESS SAFETY QUICK DISCONNECTS AS PICTURED AND ALL ACCESSORY PACKAGE
THE SUPER DELUXE TE700 EXTRACTOR IS FOR MAKING CONSUMABLE PRODUCTS AND IS FITTED WITH STAINLESS STEEL FITTINGS ALL THE WAY THROUGH. IT COMES WITH EVERY ACCESSORY YOU NEED TO PERFORM ANY EXTRACTION THIS SYSTEM IS CAPABLE OF.
Standing 32 inches with a width of 10 inches this extractor has an extraction capacity of 8+ ounces via a newly designed (700 ml) Column. Holding a maximum liquid capacity of 2500 ml in the Extractor Tank and 2500 ml Recovery Tank. Weighs 35 pounds assembled.
$4400 PRICE INCLUDES:
NEW UPGRADED DESIGN with an upgraded tank design which allows
MORE SOLVENT CAPACITY for an increased extraction efficiency to get that extra 3-5% yield INCREASED AIR BUFFER ZONE to allow more consistent recovery times
RAISED TANK BASE to allow better cooling and heating of the tank bottoms.
EXTENDED 1/4" FITTINGS for ease of use when opening and closing valves
Extract from 8+ ounces (250 grams of plant material ) and recover solvent for reuse using pure non toxic (N) Normal Butane.
Comes with Super Deluxe Package Accessories plus Recovery System and Stainless Safety QDs and Valves..
- Perform the same extraction you are now plus 1000s more, safely while recovering the solvent for reuse.
- Recovery Tank is used as Solvent Container, Delivery and Solvent Condenser
- Recovery Tank holds 2500 ml max liquid volume plus an additional 450 ml air buffer zone for better efficiency during recovery of the solvent.
- The Extractor Tank also holds 2500 ml max liquid volume.
- Plant Column holds 8+ ounces plant weight in a 700 ml volume space. Add more plant material for a high density extraction, up to 12 ounces.
- The RC Tank also allows the use of other solvents in combination with Butane or pressurized liquid solvents during the same extraction and doubles as a condenser tank to recover the solvent for reuse.
- Comes as a complete recovery system with Accessory Tank, connections, lines and all Accessories and Fully Illustrated Manual and Lifetime Support;
Comes with these additional accessories
* STAINLESS STEEL SAFETY QUICK DISCONNECTS- 6 couplers and 3 nipples.
* (SPL) Safety Purge Line with Dual QDs - SAFETY Quick Disconnect
- One Nickel Plated 1/4" QD to replace line if needed
- One STAINLESS SAFETY QUICK DISCONNECT for easy removal of SPL from Tank being purged
When using any Safety QD setup, you can not purge any part of the extractor without a Safety Purge Line. This is a built in safety feature to prevent accidental discharge. Included with every Purchase.
* Pressure Gauge with STAINLESS SAFETY QD
* High Pressure Chemical Rated Schrader Valve Adaptor with STAINLESS SAFETY QD to add pressure to your extractor.
* Laser Thermometer, Easy shoot with laser for temp reading.
* Sealing Tape, * 10 pack of all 3 sizes of O-Rings,
* Teflon Nozzle adaptor for disposable solvent canisters with FREE Safety Quick Disconnect.
Save over 15% on this Total Complete Accessory package!
NEW Complete TE700 System
$4400 shipped with insurance to anywhere USA. - Includes Assembly and Pressure Check! (Shipping may vary for foreign orders)
$7835 for TE700 system with optional Heating Jacket System and Extract Recovery Tank - Price includes shipping with Insurance.
To order the TE700 system you must call for payment instructions. 817-726-7525
Prices above are for cash only. Cash Deposits, Checks or Money Orders are the only forms of Payments taken for the TE700 call 817-725-7525 and or Email from the contact page.
CUSTOM FITTED HEATING JACKETS WITH ADVANCED CONTROLLER
These Heating Jackets are custom fit to each tank and designed with carefully tested wattages and materials to ensure perfect function for the Tamisium Extraction Process. You get 3 heating jackets in all and one Advanced Controller that will learn your demands and maintain a +- 1 degree accuracy.
- The 1st Heating Jacket is designed to fit and work with the Solvent Recovery Tank so you can heat your solvent before extracting and hold that temperature during the extraction process. This allows you to perform a heated extraction with incredible accuracy.
- Butane acts like a refrigerant during evaporation and requires a lot of wattage to maintain a constant evaporation temperature even though the temp is a low 110F. Never exceed 110F during extraction or recovery.
- The 2nd Heating Jacket is designed to fit and work with the column so you can heat your plant material for heated extractions and then Heat your Column of plant material during recovery to make sure you evaporate even the solvent that absorbed into the plant material during extraction. Never exceed 110F during extraction or recovery.
- The 3rd Heating Jacket is designed to fit and work with the Extraction/Evaporator Tank to evaporate the solvent during recovery. Never exceed 110F during extraction or recovery.
- To control all these jackets you will receive an Advanced Digital Controller that will hold temperature to within 1 degree accuracy after your process is learned by the computer in the controller. This controller has been programmed to work with the rigors of the butane chilling effects created during evaporation of butane. The controller incorporates constant variable power rather than an on off system and uses a learning phase. This allows extreme accuracy and repeatability for specific extraction parameters and recovery temps. This single controller controls two jackets at one time and allows for different target temperatures for each tank. There is no extraction or recovery process that requires heating more than 2 tanks at the same time. Operation Manual included. 110V
$200 OFF TOTAL WHEN YOU ORDER A COMPLETE TE700 SET WITH HEATING JACKETS AND EXTRA RECOVERY TANK
USD $1995 (RED) - Available Now!
USD $1995 (BLACK) - Available Now!
All 3 Heating Jackets come with the Tamisium Logo, are contoured to fit each tank. Made in America with a 1 year limited manufacturer warranty. Instruction Manual and Advanced Controller included.
CUSTOM FITTED CONNECTIONS WITH PRESSURE TEST
USD $40
We will custom fit all your Ball Valves and Quick Disconnects onto all your accessories and extractor tanks using the proper Vices and Torque. After we fit all the ball valves and Quick Disconnects, we will pressure test your Extractor and all accessories and check it for leaks. Make sure you have no problems by having us do what we have done hundreds of times. And have a ready to use extractor when it arrives at your door. If you elect to do this yourself, I want to inform you that if the stainless parts are not tightened correctly they could bond together. If a leak exist when the parts bond then you will have to cut the fitting off and replace the parts that were damaged. If we damage it, we will replace them at no charge.
What follows is a brief explanation for assembly:
To assemble the parts, you must use 3-4 full wraps of tightly wrapped Teflon tape to each and every 1/4" pipe thread. Then take a drop of oil onto the forefinger and thumb pads and twist the oil onto the taped fitting. When you are twisting the ball valves onto the fitting be sure and orient the handles in the correct orientation just at the point where the seal is formed. Do not over tighten. If you find that you have to turn it to far around because it does not seal and you are afraid you may over tighten the part, then take it off, remove all the tape from both parts and apply an additional wrap to what you applied before and repeat the procedure. If you over tighten the parts, the stainless steel part can bond to the other stainless steep part and you will have to send it to us for repair.
EXTRA RECOVERY TANK
Why an extra Recovery Tank? If you take a close look at the TE8000 you will notice that system uses a Recovery Tank to send the solvent through the column and at the same time it uses another Recovery Tank placed in a Freezer to pull the solvent through the column. If you use this second Recovery Tank to create the vacuum you will not need to reduce the temperature of your Extractor Tank. Reducing the temperature and therefore the pressure of your Recovery Tank while it is connected to your Extractor Tank will create the same vacuum or reduced temperature in your Extractor Tank because the two Tanks and their atmospheres are open to each other. In addition, you will be recovering your solvent while you are extracting from your plant material.
If that was not enough to make you purchase an additional Recovery Tank, then listen to this. After your Recovery Tank on top is empty of all the solvent, you can now remove it and place it in the freezer or cold bath along side the Recovery Tank already recovering solvent in the Freezer or Cold Bath. When you hook both those tanks together in the Freezer you have doubled your Condensation Surface area. This increased Surface area condensing vapor into liquid will greatly increase the speed of Solvent Recovery as long as your heating system can keep up with the extra cooling created with all this evaporation going on.
PREVIOUS CUSTOMERS: Due to design changes you must contact us to purchase a tank so that we can match your tank to your current system.
WHATS INCLUDED?
- Your Extra Recovery Tank will come pressure checked and assembled with 2 ball valves and 2 Safety Quick Disconnect Male Nipples just like the one in the TE700 system.
- In addition to that you will receive a Teflon Core Caustic Chemical Rated High Pressure Braided Stainless Steel Reinforced Recovery Line with 2 Stainless Steel Safety Quick Disconnect Couplers to allow you to safely connect to your current Recovery Tank to run them in series in your Freezer or Cold Bath.
$200 OFF TOTAL WHEN YOU ORDER A COMPLETE TE700 SET WITH HEATING JACKETS AND EXTRA RECOVERY TANK
USD $1495
Size of column where plant material will be placed.
US pounds = 8 ounces or 1/2 Pound with average packed density
KILOGRAMS/ML = 250 grams weight or 700 ml by volume
Both Recovery Tank (condenser) and Extractor Tank (evaporator) hold 2800 ml with a larger increased air buffer zone to facilitate a safer more efficient extraction and solvent recovery.
All Tamisium Extractors come with a limited lifetime warranty and limited lifetime support.
Every extractor comes with a Fully Illustrated Operation Manual
Column capacity represents the volume of plant material you can extract from with that particular size extractor. The weights are a guide to help you find the desired coarseness you need to have your plant material ground to in order to occupy the given space for an efficient extraction to occur. Each column represents 1/4 the volume of the solvent required to extract from the column when full. In other words. The solvent tanks are 4 times larger than the column that holds the organic material being extracted. 1 gallon translates into 1 kilo of material capacity with most dried botanicals when ground up to the proper coarseness
We do not sell these extractors for indoor use in any environment not properly set up to use any flammable solvent for extraction purposes. As most solvents are flamable. Please treat the extractor accordingly no matter the solvent chosen to use. These extractors are sold for use in professional laboratory conditions operating under strict safety guidelines. NO SPARKS OR FLAMES SHOULD BE PRESENT WHEN ANY FLAMMABLE SOLVENT IS USED IN ANY EXTRACTION SYSTEM.
Please remember that most solvents are flammable. When opening and closing any of the extractors, please safely purge the units and do so in a well ventilated, spark free environment using our safety purge line. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Accessory Safety Purge lines are included for each extractor.
