TE700 ACCESSORIES
Advanced Heating System and Extra Recovery Tanks are now Available!
TE700 ADVANCED HEATING SYSTEM FOR HEATED EXTRACTIONS & SOLVENT RECOVERY
3 CUSTOM DESIGNED FITTED HEATING JACKETS & ADVANCED CONTROLLER
These Heating Jackets are custom fit to each tank and designed with carefully tested wattages and materials to ensure perfect function for the Tamisium Extraction Process. You get 3 heating jackets in all and one Advanced Controller that will learn your demands and maintain a +- 1 degree accuracy.
- The 1st Heating Jacket is designed to fit and work with the Solvent Recovery Tank so you can heat your solvent before extracting and hold that temperature during the extraction process. This allows you to perform a heated extraction with incredible accuracy.
- The 2nd Heating Jacket is designed to fit and work with the column so you can heat your plant material for heated extractions and then Heat your Column of plant material during recovery to make sure you evaporate even the solvent that absorbed into the plant material during extraction.
- The 3rd Heating Jacket is designed to fit and work with the Extraction/Evaporator Tank to evaporate the solvent during recovery.
- To control all these jackets you will receive an Advanced Digital Controller that will hold temperature to within 1 degree. This controller has been programmed to work with the rigors of the butane chilling effects created during evaporation of butane. The controller incorporates constant variable power rather than an on off system and uses a learning phase. This allows extreme accuracy and repeatability for specific extraction parameters. This single controller controls two jackets at one time and allows for different target temperatures for each tank. There is no extraction or recovery process that requires heating more than 2 tanks at the same time. Operation Manual included. 110V
USD $1995 (RED)
USD $1995 (BLACK)
EXTRA RECOVERY TANK with VRV Safety Valve
Why an extra Recovery Tank? If you take a close look at the TE8000 you will notice that system uses a Recovery Tank to send the solvent through the column and at the same time it uses another Recovery Tank placed in a Freezer to pull the solvent through the column for use during cold extractions. This extra tank also allows you to keep your butane when purging versus letting it go through the safety purge line. If you use this second Recovery Tank to create the vacuum you will not need to reduce the temperature of your Extractor Tank. Reducing the temperature and therefore the pressure of your Extra Recovery Tank while it is connected to your Extractor Tank will create the same vacuum or reduced temperature in your Extractor Tank because the two Tanks and their atmospheres are open to each other while one is being chilled. In addition, you will be recovering your solvent while you are extracting from your plant material.
If that was not enough to make you purchase an additional Recovery Tank, then listen to this. After your Recovery Tank on top is empty of all the solvent, you can now remove it and place it in the freezer or cold bath along side the Recovery Tank already recovering solvent in the Freezer or Cold Bath. When you hook both those tanks together in series while in the freezer you have doubled your Condensation Surface area. This increased Surface area condensing vapor into liquid will greatly increase the speed of Evaporation and Solvent Recovery as long as your heating system can keep up with the extra cooling created with all this evaporation going on.
WHATS INCLUDED?
- Your Extra Recovery Tank will come pressure checked and assembled with 2 ball valves and 2 Safety Quick Disconnect Male Nipples just like the one in the TE700 system.
- In addition to that you will receive a Teflon Core Caustic Chemical Rated High Pressure Braided Stainless Steel Reinforced Recovery Line with 2 Stainless Steel Safety Quick Disconnect Couplers to allow you to connect to your current Recovery Tank to run them in series in your Freezer or Cold Bath.
- New Tanks are fitted with a Vented Safety Pressure Relief Valve to relieve pressure in the event hat the tank is over heated and or over filled. Set to 125 psi
USD $1595
Laser Thermometer |
|
|
$79.99 |
Pressure Gauge with STAINLESS SAFETY QD Coupler |
 |
| 160 psi oil filled, Comes with STAINLESS SAFETY Quick Disconnect (1/4" MNPT) (photo may vary from actual item description) |
|
$79.99 |
Safety Purge Line with Brass SAFETY QD |
 |
| Coupler 20 ft Purge Line with 1/4 inch Brass SAFETY Quick Disconnect. You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank. Brass Safety QDs will interchange with Stainless Safety QDs. |
|
$26.99 |
Safety Purge Line with Stainless SAFETY QD Coupler QDs on Extractor Tank or RC Tank. Brass Safety QDs will interchange with Stainless Safety QDs. |
 |
|
20 ft Black Purge Line with 1/4 inch Stainless SAFETY Quick Disconnect for easy line replacement. You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank. Brass Safety QDs will interchange with Stainless Safety QDs. |
|
$54.99 |
Teflon Sealing Tape |
 |
| ( 260 foot x 1/2 inch ) |
|
$1.49 |
Granulated Activated Charcoal ( 1 pound ) |
 |
| This is not your average pet store Charcoal. The Granules are consistent in size and porosity and made specifically for lab filtering applications. It is specially treated for extra purity, non-toxic and safe to use. |
|
$18.99 |
Extra Teflon Butane Nozzle Adaptor |
 |
|
For Disposable Solvent Canisters ( Teflon ) |
|
$15.99 |
D Limonene ( 1 gallon ) NOT IN STOCK |
 |
|
Used to replace Naphtha when washing or transporting oils. A fairly non toxic substitute with comparable/better evaporation rates to Naphtha, No Has Mat Fees and some consider superior cleaning abilities. |
|
$44.99 |
Schrader Valve - High Pressure and Chemical Rated |
 |
|
Used to add pressure safely to any tank or all tanks when assembled. Only comes in 1/4 inch Brass without QD. This valve is not an automotive Valve. It is the same size and can be used with any automotive air compressor but the chemical ratings on the seals and pressure ratings on this valve far exceed the pressure ratings of your typical Schrader Valves found on car tires. DONT TRY TO USE ANYTHING ELSE TO ADD PRESSURE! |
|
USD $12.99 |
Obtaining N Butane and other SOLVENTS
ACQUIRING QUALITY PURE BUTANE AND OTHER SOLVENTS.
AIRGAS: RULES/PROCEDURE
You can obtain 99%, 99.5% or 99.9% pure N (normal) Butane from AIRGAS or most any Specialty Gas Supplier. We recommend 99%. After your first recovery you will be purifying your butane to 99.5 or better. What evaporates away wiht the butane is of no concern to your finished product. What does not is washed out after the first recovery of the solvent and not placed back in the butane used from then on.
If you want to use AIRGAS as your supplier, you must set up an account with your local AIRGAS Outlet in your city and state.
Once you have set up your account, you can order using the part numbers below.
YOU MUST HAVE YOUR LOCAL REPRESENTATIVE IMPORT THE PART NUMBER INTO THEIR REGION FROM THE TEXAS REGION.
You must use these part numbers below
AGAIN: If the AIRGAS Outlet does not show the part numbers in their system, you should request they pull the part numbers into their region from the TEXAS REGION.
Prices for the tanks and solvents will vary from state to state. Shipping charges may apply.
Please allow all of us to obtain solvents form Airgas by conducting your request in a professional manner as the Federal Law dictates.
We understand some of you have new laws that allow you more freedom but we all do not share that same view or freedom.
Here are the requirements and details you need to place the order for 4.5 gallons of N Butane in a rentable tank or tank you can purchase.
- You will have to set up an account with AirGas in your City and State
- If you want the gas delivered, you may be required to have a place of business. Otherwise you will have to go to AirGas to pick the tank up when it arrives at their location.
- You must use the part numbers supplied below AND you may need to request that your local AirGas supplier pull the part numbers into their Region System from the Texas Region System.
- You must request a LIQUID SIPHON on the tank ordered. That is what the S in the part number is for.
BE SURE AND ORDER FROM YOUR LOCAL AIRGAS SUPPLYING YOUR CITY AND STATE.
THIS WILL BE THE SAME AIRGAS YOU HAVE SET UP YOUR ACCOUNT WITH.
If you have any problems with your local AIRGAS supplier you can call the person below. If the problem is that they cannot find the part number, Read the above text in red again.
Airgas Dallas Call Center
Steve Crawford – Manager
972-620-6213 - Direct
972-241-0166 – Call Center
PARTS AND PART NUMBERS for Tanks, N-Butane, and Connections
LP5 Tank Cylinder - WITH LIQUID SIPHON PREFILLED WITH 99%, 99.5% or 99.9% PURE N-BUTANE. Mercaptan Free
YOU HAVE TO MAKE SURE YOU GET A LIQUID SIPHON ON YOUR TANKS TO GET OUT THE LIQUID INSTEAD OF VAPOR GAS
Repeat this over and over when ordering from any GAS/SOLVENT SUPPLIER.
Below are the part numbers for your choice of purity of N Butane only. The TANK RENTAL or TANK PURCHASE PRICE IS NOT INCLUDED. The tank size and type is for ordering only.
AirGas Part # NB CPLP5S: (S Stands for Siphon Tube)
LP5 4.5 Gallon Tank with LIQUID SIPHON TUBE
22 lbs Chemically Pure 99% pure N-Butane (Mercaptan Free)
4.5 gallons
** Prices for N-Butane start at: $118.00
AirGas Part # NB ILP5S (S Stands for Siphon Tube)
LP5 4.5 Gallon Tank with LIQUID SIPHON TUBE
22 lbs Instrument Grade 99.5% pure N-Butane (Mercaptan Free)
4.5 gallons
** Prices for N-Butane start at: $132.00
AirGas Part # NB UHPLP5S (S stands for Siphon Tube)
LP5 4.5 Gallon Tank with LIQUID SIPHON TUBE
22 lbs Ultra High Purity 99.9% pure N-Butane (Mercaptan Free)
4.5 gallons
** Prices for N-Butane start at: $742.00
The above prices are for a the specified tank filled with the specified solvent.
The prices do not include the rental cost or purchase price of the empty tank.
If you want to rent the tank, there is an additional charge.
You have the option of purchasing the tank to avoid renting.
Rent or Purchase the Tank for Exchange and only pay for the solvent added.
** LP5 Monthly Cylinder Rental - Starts at $6.00
** Outright sale of LP5 Cylinder which is refillable - Purchase Prices Start at: $120.00
Purchasers would be responsible for the rental cylinders and seeing that these charges are paid and cylinders returned through your account when they are empty.
TANK FITTINGS TO CONNECT TO YOUR TAMISIUM EXTRACTOR
The prices below include fittings to connect to any tank. The part numbers for the fittings are included below and include the CGA 510 fitting to connect to the AirGas cylinder and give you a ¼” MNPT to connect to one of the Tamisium Safety QDs. Total cost will be approximately $13.60
The part numbers for all fittings needed are below and you need both of them:
Do not return the fittings once you purchase them. Remove them each time a tank is returned.
** 1. Airgas Part # Y99 510 C14 (nut-one each required for each tank)
Price: $5.60
** 2. Airgas Part # Y99 580-C13 (nipple-one each required for each tank)
Price: $8.00
You will need both parts above!
CGA510 Note:
When the cylinder is empty and returned, either for an exchange on the rental cylinder or a refill of a customer owned cylinder, the CGA fitting must be removed and kept at the customer site to use again on the new cylinder.
Butane may be controlled to some degree in the state you live in. Since we are not aware of all the laws in all the states, Tamisium Extractors inc. cannot supply any solvents to you. It is up to you to learn about the rules and regulations of the state and country you live in regarding solvents. There are many solvents that can be used in a Tamisium Extractor. I have used Butane, Heptane, Pentane, Hexane and more for extracting chemicals and oils from plants for over 5 years in the state of Texas and these are not the only ones I have used in this extractor. We obtain Butane from the AirGas Specialty Gas Department. We obtain other solvents from various Laboratory Supply Facilities in Texas to avoid shipping charges. The Laboratory Supply Facilities usually require a permit or some form of business document stating the intended purpose for the apparatus and or solvents purchased. This varies from state to state and is not always required.
** It has come to our attention that some Airgas Outlets are not aware of or will not honor these prices. We have heard reports of some Outlets charging over inflated prices for N butane while the one down the street honors the prices above. Not sure what the legal requirements in your states are for pricing but you may want to take that up with the appropriate agency. We are only passing on pricing we obtained from the Airgas people indicated on this site to give you some idea of what prices you can expect to pay. We cannot guarantee pricing for a company we do not control. There are many Specialty Gas Suppliers to choose from.
However, you best chance to get the prices listed here are to follow these instructions to the letter.
Please remember that most solvents are flammable. When opening and closing any of the extractors, please safely purge the units and do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Accessory Safety Purge lines are available for each extractor.
MORE ACCESSORIES COMING SOON
- Rotary Evaporators coupled to a chilled vacuum chamber especially designed to evaporate 100% and recover 100% of butane solvent from all extractions.
- Disposable Butane Canisters
- Weight Scale in Grams; Various Sizes
- Filter Disks
- Internal Charcoal Insert Canisters
- Heating Mantles
- Separatory Funnels
- Beakers
- Our own Patent Pending Solvent Recirculating Filtration System for cleaning odors and coloration from your diluted extracts
All of the prices on this site are in USD.
