Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

TE12000 Extractor

TE12000 Extractor
TE12000 Extractor TE12000 Extractor TE12000 Extractor TE12000 Extractor TE12000 Extractor TE12000 Extractor
Product Code: TE-12000
Availability: In Stock
Price: $39,995.00

Available Options


TE12000 Automation:


TE12000 Dual Tank Add On:


TE12000 ASME Coded:


Qty:  
   - OR -   

By clicking the ASME option above you are converting your Non ASME TE12000 pump free pkg into a ASME Coded System that can be certified in CO and WA.

TE12000 Full Automation Record Repeat

TE12000 ml Column Volume = 4 kilo weight (8.8 pounds avg Density) Extract and Recover in 2-4 hours.

 

TE-12000 system - Jacketed Extractor Tank - Single Jacketed Solvent Tank System
$39,995

  • 1Extractor Tank Jacketed
  • 1 Solvent Deliver Tank that serves as the Solvent Recovery Tank, Jacketed
    Jacketing the Extractor tank allows you to eliminate the extra RC tank. This reduces cost and the overall footprint.
  • 2 silicone heaters ( Column and Sucker Tank )
  • 2 heat controllers
  • Sucker/Dryer Tank with stainless lid for Pressurizing and clear Lexan Lid for Vacuum.
  • Full Set it and Forget it Automation can be added at any time. Record and Repeat any formula
  • Assembled Pressure checked and tested.
  • For a short time a Free $2500 TE12K Wafer Valve will be included.
  •  

TE-12000 system - Non Jacketed Extractor Tank - Dual Jacketed Solvent Tank System
$48,995

  • 1Extractor Tank Non-Jacketed
  • 1 Solvent Deliver Tank, Jacketed
  • 1 Solvent Recovery Tank (can be combined to reduce cost) Jacketed
  • 3 silicone heaters ( Extractor Tank, Column and Sucker Tank )
  • 3 heat controllers
  • Sucker/Dryer Tank with stainless lid for Pressurizing and clear Lexan Lid for Vacuum.
  • Full Set it and Forget it Automation can be added at any time. Record and Repeat any formula
  • Assembled Pressure checked and tested.
  • For a short time a Free $2500 TE12K Wafer Valve will be included.
    • You get a 12000 ml column which holds 6-12 pounds of plant material depending on density of the packed column
    • Can Extract up to 250 grams of extract per hour and can run up to 4 times per 8 hour shift or 12 times per day.
    • 48 liter (12 gallon) Extractor Tank with Wide mouth access and bottom drain access. Comes with a High Wattage permanent bonded Silicone Heating Pad on tank bottom controlled by a dual zone controller accurate to .1 degree
    • 48 liter Solvent Delivery Tank / Solvent Recovery Tank with Heating Jacket controlled by a dual zone controller accurate to .1 degree.
    • 10 liter (3.5 gallon) Solvent Dryer / Evaporator Tank / Catch Tank wiith wide mouth access and heating pad with temperature controller. A Stainless Lid and a See Thru Lexan Lid. Collect multiple extractions into one easy access tank that is designed for easy refinement and cleaning extracts of solvents with a vacuum pump.
    • Over $4,000 of Stainless Safety Connections and Stainless Steel Braided Caustic Chemical High Pressure Lines. You get a separate set for all liquid or vapor transfers for each process.
    • Safety inline Relief Valves with pre set Crack Pressures on every tank and line where required.
    • All Accessories needed to monitor and control your extraction parameters so you can repeat the process over and over to ensure you get the same quality out every time.
    • Multiple connections of various sizes on every tank for easy accessory hook up and monitoring while liquid and vapor transfers are taking place. Comes fitted for adding sensors to automated the system now or in the future.
    • Removable Lids with Liquid Siphon tubes for both Recovery and Solvent Delivery Tanks. This siphon connections gives you the ability to take iquid from the tank without inverting the tank.
    • Complimentary $2500 TE12K Wafer Valve for a short time.

 

What can this extractor do for your business?

 

  • All test have shown results to be faster, cleaner and superior to any other chemical oil extraction process.
  • Cost to operate is a fraction compared to high temp and high pressure systems.
  • Safety is paramount and is the reason behind the conception of the original system. Safety Redundancy in place.
  • Bio Fuel and some Medicine production that was cost prohibitive can now be cost effective.
  • Extracts Slow, Fast, Hot, Sub Freezing, With multiple polarity solvents so you can target one specific component in a plant in a zero pressure or higher system for the first time ever with Zero Negative Reaction.
  • Consumes the lowest wattage of any extractor or solvent recovery system ever created. Now a cost effective bio fuel extractor is a reality. Can create fuel with a negative loss for the first time. Better than cost effective. It is now profitable.
  • Extracts and recovers the solvent in one cycle. No need to set to extract and then again to recover the solvent. Set it up, Leave it overnight and come back to a finished product.
  • No compressors or pumps or any of the problems associated with their use are necessary anymore. When extracting chemicals with high boiling points you can accomplish even faster recovery times than with commercial recovery machines, hassle and worry free, with our proven system of recovery. With volatile oils with lower boiling points requiring slower solvent recovery you still have that option. The best of both worlds.

 

  • You can load any volume of plant matter you want in the column. 25% to 100% full for example.
    Running a smaller quantity in a system designed to run larger and faster means you will just finish recovering the lesser
    amount of solvent that much quicker because you use a loading ratio of solvent based on volume of space used in the column.
    The column and tank ratios are designed so that the column is the maximum column size you can use for this system.
    Any larger column would force you to have to recover and loop the solvent back through the plant to complete the extraction.
    Looping prevents the use of co solvents and fast extractions while also making it hard to establish when the process has completed.
  • You can adjust the contact time to as little as 5 minutes or to your desired soak time in a properly volumized system.
  • No looping is required. An adequate volume solvent tank holds the solvent you need to perform a complete extraction.
  • Perform the extraction while the solvent is in liquid phase during the entire extraction process.
    Liquid phase extractions allow the fastest most efficient temperature adjustments where Gas Phase prevents this control.
  • Liquid Phase also allows the use of co solvents to be added to dissolve out chemicals not dissolved by the primary solvent.
  • Use any primary solvent that boils at greater than 0F. This system is set up for butane.
    The only thing that changes when using other primary solvents is a temperature change during recovery.
  • Recovery is a separate process from extraction allowing you to control the temp, time and polarity.Recovering while
    extracting forces the solvent to remain at a specific temperature and pressure dictated by the recovery
    process and it forces the solvent to remain in contact with the plant matter the whole time and eliminates the ability
    to add co solvents. This is highly undesirable because it forces you to perform one single type extraction.
    Seperating the processes allows you to perform that operation if desired and so much more.
    The Non looping process means that you have enough solvent to perform an extraction in one pass allowing you
    to extract first and then recover the solvent enabling all those controls.
    The Tamisium design separates these two processes giving you back more control to target and avoid various chemicals
    by using contact time, teperature and polarity changes.
  • The TE3000 and TE12000 incorporate a Wafer Valve and a Sucker Tank to eliminate the need to ever open the larger
    Extractor tank to access your finished product. This is safer and decreases production time.
  • The systems are carefully designed to self clean eliminating the need to ever clean so long as you incorporate the
    Sucker tank and utilize the wafer valve. Your extractor tanks will always appear as new after every use.
  • The single most important accessory of a TE3000 and TE12000 is the highly prized Channel Filter which
    courses the extract through a long channel of filter medium ranging from 8-30 feet in length allowing the
    Activate Charcoal filtering medium enough time to enact full filtering effect. The requirements of AC
    are in the realms of time and quanity. Those are carefully calibrated to maximum efficiency for both systems.
  • Extraction times are set by the user and can be as fast as 5 minutes to as long as you like to a complete extraction.
    No need to recover a less than adequate amount of solvent and loop back through the plant material.
    The correct amount of solvent is used once and then recovery is initiated. No looping necessary.

 

 

By incorporating the innate physical characteristics of butane and other solvents to perform a low pressure low temperature extraction we can produce the widest range of high quality extracts in the world with the least effort safely without dangerous contaminating pumps, high heat or pressure.

Edit Recipescrop

Any TE3000 or TE12000 can be fully automated.

This is a fully automated walk away and come back process that can be recorded and repeated to standardize your output.

 

 

 

 

 

 

 

 

      TE12000 Solvent Delivery                TE12000 Recovery-b          TE12000 SuckerTankDrain

Simplicity
Shown here is the TE-12000 4 kilo capacity column with 48 Liter Extractor Tank and 48 liter RC Tank.

  1. The first image depicts the extraction configuration. The solvent Delivery Tank is connected to the top of the plant column ready to send solvent through at the specified temperature and polairty you desire. It will hold the solvent in contact with the plant matter at any time and temperature you desire during this operation.
  2. The second images depicts the solvent recovery configuration. The RC tank is connected to the two top vapor outlets on the Extractor Tank and Column ready to receive and recover all solvent vapor at any speed you desire. 1-10 hours.
  3. The third image depicts the extract removal configuration which allows you to drain your finished product to further dry it of any trace solvents or other VOC. As low as 0 ppm solvent is achieved.  Once your extract is in your sucker tank and dried it can be safely removed in a portable safer solution that can be carried to another locatioin where it can be opened and accessed.

    It is important to note that the extractor can accumulate many batches before draining and or the sucker tank can hold many runs before opening. This decreases production time and increases safety.

 

48 liters is used to extract from 12 liters of plant material because that is what it takes to perform a complete extraction. It is not magic. It is what is required.

  1. The first volume enters into the plant and is held in because it absorbs into the plant matter for the most part.
  2. The second volume enters in to wash out and force the first volume out but mixes to some degree with the first.
  3. The third volume enters in to wash out what remains and is partially held in by absorbtion. The solvent absorbed into the plant matter is recovered from that position.

A fourth volume is added to allow more space to add co solvents and increase yields due to losses sustained for those that choose to perform very rapid cold extractions.

There is no secret way around using this loading ratio with liquid phase solvation processes. I know because I hold the patent on this process. A sublimating solvent like CO2 may require as much as 40x the solvent as the column will hold. The more pressure used to compress sublimating (GAS) solvents into less space the less the loading ratio. A liquid phase solvent is already compressed and cannot be compressed any further operating at maximum density without high pressure and all the cost associated with high pressure.

It is known through 1000s of experiments with 100s of different plants with many solvents that by the time the third volume of any solvent enters the plant most if not all the compounds have been dissolved and washed out so long as the polarity of that solvent matches the target. The last 4th volume is absorbed and therefore held in the plant and is recoverd from that position. It is not magic. It is just the way it works. There is no way to use less. Using less sovlent in your starting tank will lead to looping which eliminates all the controls one has over the extraction process.

Systems that use less than 4x solvent than the plant column holds in plant matter are recovering that solvent as it passes out and then they are looping it back through. Looping adds extreme contact time and allows the solvent enough time to dissolve heavy waxes and other dark compounds. This forces those system and their operators to add ultra cold temperatures to disable the solvent's ability to dissolve these heavy dark lipids. Just like sugar does not dissolve well in cold water. I
t does not dissolve fast in room temp water either if it is not in contact long enough. Reduce time instead and increase production. Those little narrow tanks only save the competitors money. Not you. You will be forced to buy pumps and dry ice for the life of the machine while dealing with the noise limitations and hazards.
In addition to saving money time and labor by using a correctly designed system you will have a correct volume of solvent that can be passed through the plant matter as fast as you want at any temperature with any combination of solvents.

Looping processes only recovery one solvent at a time, disabling you from using co solvents to extract things that butane alone wont dissolve and extract out. Solvents are recovered in order of their boiliing points.
Also you cannot control or even add temperature because the solvent may be recovering from the column while it is extracting sending the solvent into gas phase. Last time I checked it took a lot longer to use air to heat and cool than liquid because when the molecules of solvent are touching each other in liquid phase versus spaced apart in gas phase, they transfer BTUs of heat and cold 20x faster. Temperature changes are transferred by vibration.

This system is capable of extracting from 8-12 pounds and recovering the solvent, safely and pump free, in as fast as 2 hours with 4-6 hours average using the safer more gentle contaminate free distillation process. 

 

Optional Sleeves are available for the Solvent Delivery tanks so that you can use a liquid chiller/heater which is recommended for cooling for heating.

TE12k Wafer ValveWafer Valve shown attached to top of Extractor Tank.

The Wafer Valve is a low profile Ball Valve that allows you to seal off the bottom Extractor Tank to safely and quickly remove and replace the column with a optional pre loaded column. You do not have to expose your extractor tank volatile vapors to the atmosphere to change your column or access your extract. Your extract is drained into the Sucker Tank where it can be dried and further prepared using a safer lower volume portable solution. Your extractor tank is left spotless clean and requires no cleaning. We may mention that there are no valves or lines to clean when using the wafer valve. A truly self cleaning system.

If you purchased a Activated Charcoal Canister Filter that we designed for this system and properly named Channel Filter, it would be placed in between the Wafer Valve and Extractor Tank.The Channel Filter for the TE12000 forces your diluted extract to travel over 15 feet through activated charcoal. For AC to work effectively you need this distance and contact time.
There are about 100 different types of Activated Charcoal. Each type filters out different things from liquid extracts. To be able to use AC to filter your extract inline while still diluted by Butane and just after the solid to liquid phase extraction process completes saves time and money and allows access to more isolation and cleaning. All without any volatile compounds lost because you do not have to use a less volatile solvent in a open system filter which would have to be removed using higher boiling points later.


Tamisium TE3000 Dryer Sucker TankThe Sucker/Dryer Tank Below holds near 5 gallons on the TE12000 system and comes with a stainless Pressure Lid for holding pressure when receiving extract from the extractor tank as well as a Heating Pad and Controller to target evaporation of various compounds based on their boiling points.
Also called the Dryer Tank when used to evaporate and recover all remaining solvents and compounds during the drying process. This is when you could add the Lexan Lid for pulling a vacuum so you can dry with less heat. Once your volatile compounds are removed you can go up to 212F to targer even harder to remove compounds if heat is allowed after removing and condensing your aromatics or lower boiling point extracts.
Using a tank like this, in conjuction with a vacuum oven or to replace it, allows you to have more control over the process while also allowing you to attach other apparatus such as a clevenger condenser so that those compounds evaporating away are not lost forever. Keep in mind condensing compounds is one method of obtaining the most pure isolations.
We have a few other tricks that will have your competition wondering how you do it. We will inform you of those after purchase and will share future developments with you as we progress with more efficient equipment and ingenious designs.

 

Take a look on the inside of the ASME Coded dryer/sucker tank. This tank is created using 8 different machined parts and then the welds are removed for a smooth finish facilitating easy removal of the most difficult extractions while providing a food grade surface you could cook on. After machining them out they are welded together and then machined again to form a perfect shape to ensure a perfect seal. Welding causes metal to warp. Machining the sealing surface after the parts are welded together corrects any misalignment issues. After the tank is welded and machined, we then remove any weld marks. With every weld, the part is surrounded with Argon Gas to prevent oxidation during the welding process. This is necessary if you want a food grade product that will not trap bacteria or corrode. With food grade parts you cannot have areas for food particles to deposit where bacteria can grow. The surface has to be polished and free of pitting cracks and crevices. It is a required expensive process.
States that do not understand all these requirements will learn the hardway at your expense and the expense of your end consumer.

TE3000 Sucker Tank with Heater and ControllerOn the top of this short cylindrical tank a o-ring groove is cut into the surface which seals against a flat Pressure Lid with various fittings. Also included is a resealing pressure relief valve for safety. These fittings allow you to monitor extract inside while you add more extract or solvent or dry it out for final preparation.
You can compile multiple extractions into this tank which allows you to vacuum dry out the extract from multiple runs in a single instance. A heating pad with a temp controller accompanies this very important piece of equipment. Maintaining a constant predetermined temperature to counter any cooling effect from evaporation ensures complete removal of a specific solvent during drying phase. As little as 2 ppm butane can be achieved.
You can also use this tank to steam distill any essential oils from your higher viscosity extracts with the addition of a simple condenser connected to the output. Now you can make expensive more isolated essential oils based on their varying boiling points for less money and have a edge on your competition with this unique draining, drying, steam distillation process.

 

The TE3000 Recovery Tank doubles as a Solvent Delivery TankHere is a closer look at the Solvent Delivery Tank and Recovery Tank.

The TE12k or 12000 has a ASME coded threaded on cap with a siphon tube allowing you simply set your solvent tank on the floor versus inverting it to get the solvent out. A simple tank that is not so simple.

Machined from 10 separate parts and assembled like the sucker tank described above in a specific order that allows us to remove the welds as we go. This unique design allows us to focus temperature transfer in all the right places with carefully engineered ratios of thickness, volume dimensions and HW ratios. You see here 4 connections strategically placed in various locations. One is for receiving vapors. One is for monitoring with the  accessories that are included and one additional is for attaching 2 RC tanks together for Rapid Recoveyr of Solvent. On the automatable systems we added 3 more fittings for sensors.
There is another fitting which holds a very special safety relief valve that vents unsafe pressures from the tank and reseals after safe pressures have been reached. Dont be misled.

All tanks that hold volatile liquids will expand and could blow up the tank if this VRVI valve is not present. This relief valve can be set up to vent into the atmosphere or the venting can be directed to another safe location. There is a final valve in the center. This unique carefully designed proprietary fitting allows you to convert your RC Tank into a siphon tank or remove the lid for adding co solvents.

It is self sealing and requires a signle oring seal. When a siphon tube is used you can draw liquid from the bottom while the tank is still setting upright. For people that either lack the mobility or the strength to maneuver this tank onto the column, they now have another option and we will tell you how to do it using nothing more than small pressure differentials created by solvent.

shipped TE12000 Tamisium Extractor


  TE12000 Packed and Crated on Pallet going out to the Customer. It takes a long time to build these systems in the manner we build them in. Most of the time they are sold before we receive them.
Dont get caught waiting in line. Order today and start creating more products while saving money and extracting safely.

 

Below I have outlined the features and benefits of the now regularly stocked TE-12000 Commercial Tamisium System.

1. With the TE-12000, our newest Production Commercial System, you can extract from +- 4 kilos of plant material and recover the solvent in between 2-6 hours. Faster recovery times can be achieved with our proprietary Rapid Solvent Evaporating and Recovery Process.

 

 

If you are interested in having your own 2 pound or larger oil extractor, contact Tamisium Extractors Inc. by email to discuss options for purchase or call direct at 817-726-7525.

Please remember that most solvents are flammable. When opening and closing any of the extractors, please safely purge the units and do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Accessory Safety Purge lines are available for each extractor.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Sitemap - Privacy Policy - Terms Of Service